How is 3D printing price calculated?

Price is based on the finished weight of your part. We multiply the part weight in grams by the per-gram rate for your material, add 10% if the print runs longer than 12 hours, add any finishing you select, then apply a 19% service charge.

How much does PLA 3D printing cost in Sri Lanka?

PLA is Rs 23.50 per gram. ABS and PETG are Rs 27.50 per gram. Upload your file for the exact part weight and final price.

Can you print materials other than PLA, ABS and PETG?

Yes. Nylons, composites, resins and metals are all available, but they are quoted individually rather than instantly — send an inquiry and an engineer will confirm the final price, usually within one business day.

Pricing · Sri Lanka

You pay for what the part weighs.

No opaque machine-hour formulas. Upload your file, we calculate its finished weight, and multiply by a published per-gram rate. You get one clear estimate, confirmed by an engineer before anything is made.

Get your price Explore materials

Material rates

Instant pricing, three materials.

These rates are published and priced automatically the moment you upload. Everything else in our library is quoted by an engineer.

PLA

Standard plastic

LKR 23.50 / gram

Density: 1.24 g/cm³
Tensile: 50 MPa
Heat: 55 °C

Price a part in PLA

PETG

Standard plastic

LKR 27.50 / gram

Density: 1.27 g/cm³
Tensile: 50 MPa
Heat: 70 °C

Price a part in PETG

ABS

Standard plastic

LKR 27.50 / gram

Density: 1.04 g/cm³
Tensile: 40 MPa
Heat: 90 °C

Price a part in ABS

Every other material is quoted on inquiry

Nylons, carbon and glass composites, resins, high-temperature polymers and metals are all available — we just price them individually rather than automatically, because material cost and machine time vary too much to publish a single rate. Configure your part, send the inquiry, and an engineer confirms the final price.

ASA TPU PA6 PA12 PA11 PC POM PEEK ULTEM PA-CF PA-GF Std Resin ABS-Like Tough Flex Resin HT Resin ABS-ESD PP Clear Ti64 AlSi10Mg 316L

How pricing works

What your price depends on.

01
Part weight
We calculate the finished weight from your uploaded geometry — solid volume, scaled by your infill setting, multiplied by material density.
02
Material rate
Weight in grams × the published per-gram rate for your chosen material.
03
Long-print surcharge
Prints estimated over 12 hours occupy a machine for a full day or more, so a 10% surcharge applies.
04
Finishing & service charge
Any post-processing you select is added, then a 19% service charge is applied to the total.

Get your figure

Upload your file and the quote tool returns a single estimated price for the quantity you need — no arithmetic to do yourself. An engineer confirms the final figure before anything is produced.

Estimate a part

Prints over 12 hours

A build running beyond 12 hours ties up a machine for a full working day, so a 10% surcharge is added. The quote tells you the estimated print time up front — reducing infill or choosing a coarser layer height often brings a part back under the threshold.

When we quote manually

Any material outside PLA, ABS and PETG
Quantities above 50 pieces — priced as a production program
Critical tolerances verified against process capability
Assemblies, custom finishing and inspection-heavy programs
STEP / IGES files, which we convert before quoting

The only accurate quote is your geometry.

Upload a file — we'll show the part weight, print time and full price breakdown in under a minute. No account required.

Upload a part